Filter
Top Products
16
GB
You can record just the portions you like from a
CD on a tape. You can also record a radio
program.
Use buttons on the unit for the operation.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to select
the desired source to record.
• TUNER: To record from this system’s
tuner.
• CD: To record from this system’s CD
player.
• MD or VIDEO: To record from the
optional component connected to the
MD/VIDEO IN jacks.
3 Press TAPE z REC.
“REC” and “N” lights up and the tape
deck stands by for recording.
4 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
5 Press TAPE nN repeatedly to select
recording side.
If you select both sides recording or front
side recording, press TAPE nN until
“N” appears. If you record on the reverse
side, press TAPE nN again until “n”
appears.
6 Press TAPE X, then start playing the
desired source to record.
Recording starts.
Other operations
You can adjust the bass and treble to enjoy more
powerful sound.
Generating a more dynamic
sound (Dynamic Sound
Generator X-tra)
Press DSGX on the unit.
To cancel the DSGX, press DSGX again on the
unit.
Adjusting the bass and treble
You can adjust the bass and treble.
1 Press EQ repeatedly to select “BASS”
or “TREBLE”.
Each time you press the button, the display
changes as follows:
BASS y TREBLE
2 Press ./> repeatedly to adjust the
level while “BASS” or “TREBLE”
appears.
To adjust the bass on the unit
Turn BASS +/–.
To adjust the treble on the unit
Turn TREBLE +/–.
To exit the bass and treble
settings
Press any button other than EQ or ./>.
Also, if you do not perform any operations for a
few seconds, the display automatically returns to
the original display.
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press TAPE x.
Pause recording Press TAPE X.
Sound Adjustment
Adjusting the sound