Filter
Top Products
14
GB
You can play all the tracks or a single track on a
disc repeatedly.
Press REPEAT repeatedly during playback
until “REP” or “REP 1” appears.
REP: For all the tracks on the disc up to five
times.
REP 1: For a single track only.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP 1” disappear.
Note
When you select “REP 1”, that track is repeated
endlessly until “REP 1” is canceled.
You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 20).
Using the remote
1 Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2 Press PLAY MODE repeatedly in stop
mode until “PGM” appears.
3 Press . or > repeatedly until the
desired track number appears.
When programming the tracks on the
ATRAC CD or MP3 CD, press + or –
repeatedly to select the desired group, then
press . or > repeatedly until the
desired track number appears.
4 Press ENTER.
The track is programmed.
The program step number appears,
followed by the last programmed track
number and total playing time.
5 To program additonal tracks, repeat
steps 3 and 4.
6 Press N (or CD NX on the unit).
Program Play starts.
Playing repeatedly
— Repeat Play
Creating your own
program
—Program Play
Total playing timeSelected track number