Filter
Top Products
30
Error displays/Messages
*1 When the CD/MD changer is connected to the unit,
the disc number of the CD or MD appears in the
display.
*2 The disc number of the disc causing the error
appears in the display.
A programme broadcast in stereo is heard
in monaural.
• The unit is in monaural reception mode.
tCancel monaural reception mode (page
23).
RDS
The Seek starts after a few seconds of
listening.
The station is non-TP or has weak signal.
tPress (AF) or (TA) repeatedly until “AF
off” or “TA off” appears.
No traffic announcements.
• Activate “TA.”
• The station does not broadcast any traffic
announcements despite being TP.
tTune in another station.
PTY displays “--------.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the programme
type.
Error displays
(For this unit and optional CD/MD changers)
The following indications will flash for about 5
seconds, and an alarm sound will be heard.
Blank*
1
No tracks have been recorded on an MD*
2
.
tPlay an MD with recorded tracks on it.
Error*
1
• A CD is dirty or inserted upside down*
2
.
tClean or insert the CD correctly.
• A CD/MD cannot play because of some
problem*
2
.
tInsert another CD/MD.
High Temp
The ambient temperature is more than 50°C.
tWait until the temperature goes down
below 50°C.
NO Disc
No disc is inserted in the CD/MD unit.
tInsert discs in the CD/MD unit.
NO Mag
The disc magazine is not inserted in the CD/
MD unit.
tInsert the magazine in the CD/MD unit.
Not Ready
The lid of the MD unit is open or the MDs are
not inserted properly.
tClose the lid or insert the MDs properly.
Push Reset
The CD/MD unit cannot be operated because
of some problem.
tPress the RESET button on the unit.