Filter
Top Products
25
Selecting the spectrum
analyzer (SA)
The sound signal level is displayed on a spectrum
analyzer. You can select a display for 6 patterns
(Auto, A-1, A-2, B-1 to B-3), or “off.”
1 Press (SOURCE) to select a source
(radio, CD, or MD).
2 Press (MENU).
3 Press M or m repeatedly until “SA”
appears.
4 Press < or , repeatedly to select the
desired setting.
5 Press (ENTER).
Labelling a Motion Display
You can label a Motion Display with up to 64
characters to appear when the unit is turned off.
Labels will scroll in the display in the M.Dspl 1
mode (The display remains lit even when the
power is off).
1 Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2 Press (MENU), then press M or m
repeatedly until “Name Input”
appears.
3 Press (ENTER).
4 Enter the characters.
1Press (DSPL/PTY) to select the
character type.
A t a t 0 t A
2Press M*
1
repeatedly to select the
desired character.
A t B t C t ... x t y t z t 0 t 1
t 2 ... t ! t “ t # ... t *
2
t A
*1 For reverse order, press m.
*2 (blank space)
3Press , after locating the desired
character.
If you press <, you can move back to the
left.
4Repeat steps 1 to 3 to enter the
entire sentence.
5 Press (ENTER).
Tips
• Simply overwrite or enter “ ” to correct or erase a
sentence.
• To erase all sentences, press (ENTER) for 2
seconds after step 4.