Filter
Top Products
27
7 Press M or m repeatedly to select the
desired equalizer curve.
8 Press (ENTER).
9 Select the desired frequency and level.
1Press < or , repeatedly to select
the desired frequency.
Each time you press < or ,, the
frequency changes.
62 Hz y 157 Hz y 396 Hz
y 1000 Hz y 2510 Hz
y 6340 Hz y 16000 Hz
2Press M or m repeatedly to adjust
the desired level.
The level is adjustable by 1 dB steps from
–10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
3Repeat steps 1 and 2 to adjust the
equalizer curve.
10
Press (ENTER).
After the effect setting is completed, the
display returns to the normal display.
Adjusting the front and rear
volume
1 Press (SOURCE) to select a source
(radio, CD, MD, or AUX).
2 Press (SOUND).
3 Press < or , repeatedly to select
“Fader.”
4 Press (ENTER).
5 Press < or , repeatedly to adjust
the volume of front/rear speakers.
6 Press (ENTER).
The display returns to the normal display.
Adjusting the cut-off frequency for the
front/rear speakers
To match the characteristics of the installed
speaker system, you can select the cut-off
frequency of the speakers.
1 During playback or radio reception,
press (MENU).
2 Press < or , repeatedly to select
“SoundTuning.”
3 Press (ENTER).
4 Press M or m repeatedly to select
“HPF.”
5 Press (ENTER).
continue to next page t
Cut-off frequency
Frequency (Hz)
Level
off