Filter
Top Products
22
P/M (Play Mode)
• LOCAL (Local Seek mode) (page 16)
– Select “ON” to only tune into stations with
stronger signals.
• MONO (Monaural mode) (page 16)
– Select “ON” to hear FM stereo broadcast in
monaural.
– Select “OFF” to return to normal mode.
•IF AUTO/WIDE (page16)
SND (Sound)
• EQ7 TUNE (page 23) — to adjust the equalizer
curve.
• HPF (High pass filter) — to select the cut-off
frequency to “78Hz,” “125Hz” or “OFF.”
• LPF (Low pass filter) — to select the cut-off
frequency to “78Hz,” “125Hz” or “OFF.”
• LOUD (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
• AUX LVL (page 24) — to adjust the volume
level of connected auxiliary equipment.
1 Press (MENU).
2 Press (DISC/PRESET) (+) or
(DISC/PRESET) (–) repeatedly until the
desired item appears.
3 Press (SEEK) (+) or (SEEK) (–) to
select the desired setting (Example:
“ON” or “OFF”).
4 Press (ENTER).
After the mode setting is complete, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories (“SET,”
“DSPL,” “P/M,” “SND,” and “EDIT”) by pressing
(DISC/PRESET) (+) or (DISC/PRESET) (–) for 2
seconds.
Setting the equalizer (EQ7)
You can select an equalizer curve for 7 music
types (XPLOD, VOCAL, CLUB, JAZZ, NEW
AGE, ROCK, CUSTOM and OFF (equalizer
OFF)).
You can store a different equalizer setting for
each source.
Selecting the equalizer curve
1 Press (SOURCE) to select a source
(Radio, CD, MD or AUX).
2 Press (EQ7) repeatedly to select the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select “OFF.”