Filter
Top Products
10
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold (LIST).
2 Press and hold (DSPL).
The stored name will flash.
3 Rotate the volume control dial repeatedly to
select the name you want to delete.
4 Press and hold the select button.
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5 Press and hold (LIST).
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press VOL + or –.
Adjusting setup items
— SET
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until the desired item appears.
3 Rotate the volume control dial to
select the setting (example “ON” or
“OFF”).
4 Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
“
z” indicates the default settings.
*1 When the unit is turned off.
*2 When the audio output is set to “SUB.”
Using optional equipment
CD/MD changer
Selecting the changer
1 Press (SOURCE) repeatedly until “CD” or
“MD” appears.
2 Press (MODE) repeatedly until the desired
changer appears.
Playback starts.
CLOCK-ADJ
(Clock Adjust)
(page 4)
BEEP To set “ON” (
z) or “OFF.”
AUX-A*
1
To turn the AUX source display
“ON” (
z) or “OFF” (page 12).
SUB/REAR*
1
To switch the audio output.
–“SUB” (
z): to output to a
subwoofer.
–“REAR”: to output to a power
amplifier.
DIM (Dimmer) To change the brightness of the
display.
–“AT” (
z): to dim the display
automatically when you turn
the lights on.
–“ON”: to dim the display.
–“OFF”: to deactivate the
dimmer.
DEMO*
1
(Demonstration)
To set “ON” (z) or “OFF.”
M.DSPL
(Motion
Display)
To select the Motion Display
mode.
–“SA” (
z): to show moving
patterns and spectrum
analyzer.
–“ON”: to show moving
patterns.
–“OFF”: to deactivate the
Motion Display.
CONTRAST To adjust the contrast of the
display.
The contrast level is adjustable
in 7 steps.
A.SCRL
(Auto Scroll)
To scroll long displayed items
automatically when the group/
track is changed.
–“ON”: to scroll.
–“OFF” (
z): to not scroll.
LPF*
2
(Low
Pass Filter)
To select the cut-off frequency
“78HZ,” “125HZ” or “OFF”
(
z).
Disc number
Unit number