Filter
Top Products
20
RM-X4S (optional)
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
By rotating the control
Rotate and release to:
– Skip tracks.
– Tune in stations automatically.
Rotate, hold, and release to:
– Fast-forward/reverse a track.
– Find a station manually.
By pushing in and rotating the control
Push in and rotate the control to:
– Receive preset stations.
– Change the disc.*
1
During playback of a CD containing MP3
Files*
5
Push in and repeat rotating quickly to:
– Change discs one by one.
Push in, then rotate and hold to:
– Change albums.
*1 Only if the corresponding optional equipment is
connected.
*2 Available only when an optional Sony portable
device connected to BUS AUDIO IN of the unit. You
cannot connect any optional CD/MD units at the
same time.
*3 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for
2 seconds to turn off the clock indication after
turning off the ignition.
*4 When using the RDS function, you can press
(DSPL) to show “PTY” in the display.Then you can
only use your master unit or card remote
commander to receive the PTY data.
*5 Available only when optional CD unit with the MP3
file control function is connected, and an MP3 file is
played.
Press To
(SOURCE) Change source
(radio/CD/MD*
1
/AUX*
2
)/
Power on
(MODE) Change operation
(radio band/CD unit/MD*
1
unit)
(ATT) Attenuate sound
(OFF)*
3
Stop playback or radio
reception/Power off
(SOUND) Adjust the sound menu
(DSPL) Change the display item*
4
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
Rotate the VOL control
to adjust the volume.
(SOURCE)
(SOUND)
(ATT)
(DSPL)
(OFF)
(MODE)
SEEK/AMS
control
PRESET/DISC
control