Filter
Top Products
7
EN
Preparing the rotary
commander
When you mount the rotary commander,
attach the label as shown in the illustration
below.
Setting the clock
The clock uses a 12-hour digital indication.
Example: To set the clock to 10:08
1 Press (SHIFT), then press (3) (SET UP).
1 Press (5) (n).
The hour digit flashes.
2 Set the hour.
to go forward
to go backward
SET UP
SET UP
SET UP
SET UP
SET UP
Getting Started
to go forward
to go backward
SET UP
SET UP
3 Press (5) (n).
The minute digits flash.
4 Set the minute.
2 Press (SHIFT).
The clock starts.
3 Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Note
If the POWER SELECT switch on the bottom of the
unit is set to the B position, turn the power on
first, then set the clock.
SOUND
LIST
MODE
SOUND
LIST
MODE