Filter
Top Products
28
EN
Display
window
LP1
All
LP2
Front
LP3
Front R
LP4
Front L
LP5
Rear
Center of sound
field
Normal setting
(1 + 2 + 3)
Front part
(1 + 2)
Right front (2)
Left front (1)
Rear part (3)
21
3
Adjusting the listening position
1 Press (SOUND) for two seconds.
2 Press (SOUND) repeatedly until the
desired listening position appears.
3 Press (5) (n).
4 Rotate the dial to adjust the center of
the sound field to the left or right. Then
set the center of the sound field.
5 Press (5) (n).
6 Rotate the dial to adjust the center of
the sound field to the front or rear.
7 Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode appears.
Center moves to the R (rear).
Center moves to the F (front).
Center moves to the L (left).
Center moves to the R (right).
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
center of the sound field no matter where you
sit in the car.
1 Press (SOUND) momentarily until “LP1”
appears.
2 Rotate the dial to select the desired
listening position.
The listening positions appear in the order
shown above.
After three seconds, the display returns to
the normal playback mode.