Filter
Top Products
17
1 Press (SHIFT).
2 Press (3) (SET UP) repeatedly until the
desired item appears.
Each time you press (3) (SET UP), the item
changes as follows:
Clock n D.Info*
1
n Amber/Green n Dimmer
n Contrast n Voice*
1
n Beep n RM n
L.out*
2
n Loud*
1
n LPF*
1
n M.dspl n
English/French*
1
n A.Scrl*
1
*
1
When the radio is off, or when no CD, or MD
is playing this item will not appear.
*
2
When the optional equalizer preamplifier is
not connected, this item will not appear.
3 Press (5) (n) to select the desired
setting (Example: on or off).
For the “Contrast” setting, pressing (5)
(n) makes the contrast higher, and
pressing (2) (N) makes the contrast lower.
4 Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Changing the sound and
display settings
The following items can be set:
•Clock (page 7).
•D.Info (Dual Information)*
1
– to display the
clock and the play mode simultaneously (on)
or to display the information alternately (off).
•Amber/Green – to change the illumination
color to amber or green.
•Dimmer to – change the brightness of the
display.
— Select “Auto” to dim the display only
when you turn the interior lights on.
— Select “on” to dim the display.
— Select “off” to deactivate Dimmer.
•Contrast – to adjust the contrast if the
indications in the display are not
recognizable because of the unit‘s installed
position.
•Voice guide*
1
function for vocalized
comments.
— Select “Voice 1” to minimize the volume
of the guide.
— Select “Voice 2” to be louder the volume
than “Voice 1.”
— Select “Voice 3” to maximize the volume
of the guide.
— Select “Voice off” to deactivate Voice
guide.
•Beep – to turn the beep sounds on or off.
•RM (Rotary Commander) – to change the
operative direction of the controls of the
rotary commander.
— Select “norm” to use the rotary
commander in the factory-set position.
— Select “rev” when you mount the rotary
commander on the right-hand side of the
steering column.
•L.out (Line output)*
2
(page 18).
•Loud (Loudness)*
1
– to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
•LPF (Low Pass Filter)*
1
.
•M.dspl (Motion Display) – to turn the motion
display to 1, 2, or off.
•English/French*
1
– to change the vocalized
comments of the voice guide to English or
French.
•A.Scrl (Auto Scroll)*
1
(page 9, 19).