Filter
Top Products
10
Playing the stored program
1 Press (SHIFT).
2 Press (4) (PLAY MODE) repeatedly until
“PGM” appears.
3 Press (5) (n) repeatedly until “PGM on”
appears.
Program Play starts.
4 Press (SHIFT).
To return to normal playback mode, select
“PGM off” in step 3 above.
Note
“Not ready” appears in the display if no track is
stored in the program.
Erasing an entire program
1 Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
2 Press (2) (N) repeatedly until “DEL”
appears.
To delete Program 2, press (5) (n)
repeatedly until “PGM 2” appears.
3 Press (6) (ENTER) for two seconds.
The entire program is erased.
4 When you finish erasing programs, press
(4) (PLAY MODE) for two seconds.
5 Press (SHIFT).
Creating a program
— CD Program Memory
You can play the tracks in the order you want
by making your own program. You can select
up to 24 tracks for a program. You can store
the programs in memory.
1 During CD playback, press (SHIFT), then
press (4) (PLAY MODE) for two seconds.
2 Push the SEEK/AMS control up or down
to select the track you want.
3 Press (6) (ENTER) momentarily.
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish selecting tracks, press
(4) (PLAY MODE) for two seconds.
6 Press (SHIFT).
Notes
•“*Wait*” appears in the display while the unit is
reading the data.
•“*Mem Full*” appears in the display when you
try to enter more than 24 tracks into a program.
µ
RLAYMODE ENTER
TRACK
RLAYMODE ENTER
RLAYMODE ENTER
TRACK
RLAYMODE
PGM
RLAYMODE ENTER
TRACK
RLAYMODE ENTER
RLAYMODE ENTER