Filter
Top Products
13
Changing the sound and
display settings
You can set:
•CLOCK (page 6).
•D.INFO (dual information) – to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•DIM (Dimmer) – to change the brightness of
the display.
— Select “ON” to dim the display.
•BEEP – to turn the beep tones on or off.
•RM (Rotary Commander) – to change the
operative direction of the controls of the
optional rotary commander.
— Select “NORM” to use the rotary
commander in the factory preset
position.
— Select “REV” when you mount the
rotary commander on the right of the
steering column.
•M.DSPL – to turn the motion display on or
off.
Note
If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be disabled.
1 Press (SHIFT).
2 Press (2) (SET UP) repeatedly until the
desired item appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n D.INFO* n DIM n BEEP n RM n
M.DSPL
* When you have not tune the station or there
is no CD/MD being played, these items will
not appear.
Note
The displayed item will differ depending on
the source.
3 Press (4) (n) to select the desired
setting (for example: ON or OFF).
4 Press (SHIFT).
After the mode setting is complete, the
display returns to normal playback mode.
Boosting bass sound
— D-bass
You can enjoy a clear and powerful bass
sound. The D-bass function boosts the low
frequency signal with a sharper curve than
conventional bass boost.
You can hear the bass line more clearly even
while the vocal volume remains the same. You
can emphasize and adjust the bass sound
easily with the D-BASS control. This effect is
similar to the one you get when you use an
optional subwoofer system.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or, 3).
“D-BASS” appears in the display.
To cancel, turn the control to the OFF.
Note
If the bass sound becomes distorted, adjust the D-
BASS control or volume.
Level
Frequency (Hz)
0dB
D-BASS 3
D-BASS 2
D-BASS 1