Filter
Top Products
11
(SOURCE)
(MODE)
Other Functions
You can connect an optional rotary
commander (RM-X4S) with this unit.
Labelling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate labell as
shown in the illustration below.
Using the rotary
commander
The rotary commander works by pressing
buttons and/or rotating controls.
You can control the optional CD or MD
changer with the rotary commander.
By pressing the button (the
SOURCE and MODE buttons)
Each time you press (SOURCE), the
source changes as follows:
TUNER n CD n MD* n TV*
* If the corresponding optional equipment is
not connected, this item will not appear.
Pressing (MODE) changes the operation
in the following ways;
• Tuner: FM1 n FM2 n AM
• CD unit: CD1 n CD2 n …
• MD unit: MD1 n MD2 n …
• TV/Video: TV n VIDEO1 n VIDEO2
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control until you locate the
specific point in a track, then release it to
start playback.
•Tune in the stations automatically. Rotate
and hold the control to find a the specific
station.
By pressing in and rotating the
control (the PRESET/DISC control)
Push in and rotate the control to:
•Receive the stations memorized on the
number buttons.
•Change the disc.
SOUND
LIST
MODE
SOUND
LIST
MODE