Filter
Top Products
10
EN
Changing the sound and
display settings
You can set:
•CLOCK (page 5).
•D.INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
•AMBER/GREEN to change the illumination
color to amber or green.
•AUTO-DIM (Dimmer) to change the
brightness of the display.
— Select “AUTO” to dim the display only
when you turn the lights on.
— Select “ON” to dim the display.
•BEEP to turn the beep tones on or off.
•RM (Rotary Remote) to change the operative
direction of the controls of the optional rotary
remote.
— Select “NORM” to use the rotary remote
in the factory preset position.
— Select “REV” when you mount the rotary
remote on the right of the steering
column.
•A.SCRL (Auto Scroll) (page 11).
Note
If you connect an optional power amplifier and do not use
the built-in amplifier, the beep tone will be disabled.
1 Press (SHIFT).
2 Press (2) (SET UP) repeatedly until the
desired setting mode appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n D.INFO* n AMBER/GREEN n
AUTO-DIM n BEEP n RM n A.SCRL*
* When you have not tune the station or there is no
CD/MD being played, these items will not appear.
Note
The displayed item will differ depending on the source.
3 Press (4) (n) to select the desired
setting (for example: ON or OFF).
4 Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.
With Optional Equipment
CD/MD Changer
You can control up to 7 CD and MD changers
with this unit.
Playing a CD or MD
1 Press (SOURCE) repeatedly to select CD
or MD.
2 Press (MODE) until the desired changer
appears (for example CD2 or CD3).
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name*
1
$
Track name*
2
$
Clock*
3
*
1
If there is no prerecorded name for a CD or MD, “NO
NAME” appears in the display.
*
2
If the track name of an MD is not prerecorded, “NO
NAME” appears in the display.
*
3
If the dual information function is on, the clock does not
appear in the display.
Tip
If the name of the MD is too long, you can scroll it across
the display window by pressing (SHIFT), then (1) (N).