Sony CDX-L400X CD Player User Manual


 
13
Receiving traffic
announcements TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP). You can
automatically tune in an FM station
broadcasting traffic announcements. These
settings function regardless of the current FM
programme/source, CD; the unit switches
back to the original source when the bulletin is
over.
Press (TA) repeatedly until TA-ON
appears.
The unit starts searching for traffic
information stations.
TP indicates reception of such stations,
and TA flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
NO TP is indicated.
To cancel all traffic announcements, select
TA-OFF .
To Press
Cancel current (TA)
announcement
Tip
You can also cancel the current announcement by
pressing (SRC) or (MODE).
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so you wont miss hearing
them.
1 Press either side of the volume +/
button to adjust the desired volume
level.
2 Press (TA) for 2 seconds.
TA appears and the setting is stored.
Receiving emergency
announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station or CD.
Presetting RDS stations
with AF and TA setting
When you preset RDS stations, the unit stores
each stations AF/TA setting (on/off) as well
as its frequency. You can select a different
setting (for AF, TA, or both) for individual
preset stations, or the same setting for all
preset stations. If you preset stations with AF
on the unit automatically stores stations with
the strongest radio signal.
Presetting the same setting for all
preset stations
1 Select an FM band (page 10).
2 Press (AF) and/or (TA) to select AF-ON
and/or TA-ON.
Note that selecting AF-OFF or TA-OFF
stores not only RDS stations, but also non-
RDS stations.
3 Press (SENS/BTM) until BTM flashes.
Presetting different settings for
each preset station
1 Select an FM band, and tune in the
desired station.
2 Press (AF) and/or (TA) to select AF-ON
and/or TA-ON.
3 Press the desired number button until
MEM appears.
Repeat from step 1 to preset other stations.
Note
If you want to change the AF/TA setting while you
are playing a CD, press (AF) or (TA).