Filter
Top Products
5
EN
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ball-point pen.
Notes
• Pressing the reset button will erase all the
memorized program and memory functions.
• When you connect the power supply cord to the
unit or reset the unit, wait for about 10 seconds
before you insert a disc. Do not insert a disc
within these 10 seconds, otherwise, the unit will
not be reset, and you will have to press the reset
button again.
Reset button
Setting the clock
The clock has a 12-hour digital indication.
Example: Set the clock to 10:08
1 Press (OFF) or (DSPL) during operation.
If the POWER SELECT function is set to
“ON”, press (OFF). If it is set to “OFF”,
press (DSPL).
2 Press (DSPL) for two seconds.
The hour digit flashes.
1 Set the hour digits.
2 Press (SOUND) momentarily.
The minute digits flash.
3 Set the minute digits.
3 Press (DSPL) momentarily.
The clock is activated.
Note
If the car has no accessory position on the ignition
key switch, the clock cannot be set unless the
power is turn on. Set the clock after you have
turned on the radio, or started CD playback.
To go forward
To go back
SOURCE
To go forward
To go back
SOURCE
100
1000
1000
1008
Getting Started
1008