Filter
Top Products
8
EN
To locate
The next or
succeeding tracks
The current or
preceding tracks
A specific track
directly
(CDP-M305 only)
A point while
monitoring the sound
A point quickly by
observing the display
during pause
When you directly locate a track numbered over 10
Press >10 first, then the corresponding number buttons.
To enter “0,” use button 10.
Example: To play track number 30
Press >10 first, then 3 and 10.
Note
If “ ” appears in the display, the disc has reached the end
while you were pressing ). Press = or 0 to go back.
Press
+ repeatedly until you find the track
=repeatedly until you find the track
Number button of the track
)(forward) or 0 (backward) and
hold down until you find the point
0/) and hold down until you
find the point. You will not hear the
sound during the operation.
Playing CDs
Playing CDs
Locating a Specific Track or a
Particular Point in a Track
You can quickly locate any track while playing a disc
using the =/+ (AMS: Automatic Music Sensor)
buttons or number buttons. You can also locate a
particular point in a track while playing a disc.
0/) (=/+)
(CDP-M305 only)
Number
buttons
>10
=/+
0/)
Press REPEAT while playing a disc.
“REPEAT” appears in the display. The player repeats
the tracks as follows:
When the disc is played in
Continuous Play (page 6)
Shuffle Play (page 9)
Programme Play (page 9)
To cancel Repeat Play
Press REPEAT repeatedly until “REPEAT” disappears from
the display.
Repeating the current track
You can repeat only the current track in any play
mode.
While the track you want is being played, press
REPEAT repeatedly until “REPEAT 1” appears in the
display.
REPEAT
The player repeats
All the tracks
All the tracks in random
orders
The same programme
Playing Tracks Repeatedly
You can play tracks repeatedly in any play mode.
REPEAT
(CDP-M305 only)