Filter
Top Products
Getting Started
6
EN
• When connecting with analog audio cannon cables
Connect a component to the ANALOG OUT
(BALANCE) connectors.
• When connecting with a digital audio cannon cable
Connect a component to the DIGITAL OUT (AES/
EBU) connector.
a)
b)
pWhen making digital hookups
When making these connections, you cannot use the
fading in or out function (page 12).
• When connecting with a coaxial digital connecting
cable
Connect a component to the DIGITAL OUT
connector.
CD player
ANALOG INPUT
CH-1(L) CH-2(R)
UNBALANCE
CH-1(L)
BALANCE
CH-1(L) CH-2(R)
CH-2(R)
ANALOG OUT
CD player
DIGITAL OUT
AES/EBU
DIGITAL INPUT
COAXIAL
Digital mixer, etc.
a) To plug in the cables, match these positions and insert
the cables firmly.
b)To detach the cables, pull the cables out while pressing
the lock button.
a)
b)
a) To plug in the cables, match these positions and insert
the cables firmly.
b)To detach the cables, pull the cables out while pressing
the lock button.
Connecting a personal computer or work station
You can control the player with a computer by
connecting your personal computer or work station.
Connect the equipment to the RS-232C connector using
a D-Sub cable.
For details on setting of the RS-232C connector, see
“Setting the Menu Options” on page 18.
If you have CD-TEXT discs
The player can read the information stored on CD-TEXT
discs. When making this connection, the player transmits
the CD-TEXT information to your personal computer or
work station.
Analog mixer, etc.
CD player
Digital mixer, etc.
DIGITAL OUT
AES/EBU
DIGITAL INPUT
AES/EBU
132
Pin Polarity
1: GND
2: HOT
3: COLD