Filter
Top Products
Locating a Scene or Track You Want
Locating a Scene or Track You Want
Storing Information About CDs (Custom Files)
Storing Information About CDs (Custom Files)
Storing Information About CDs (Custom Files)
Storing Information About CDs (Custom Files)Storing Information About CDs (Custom Files)Storing Information About CDs (Custom Files)Storing Information About CDs (Custom Files)
31
GB
Playing tracks in the Hit List
1 Press HIT LIST before you start playing.
The HIT LIST button lights up and “HIT LIST”
appears in the display.
2 Turn the JOG dial or the ≠ AMS ± dial until
the desired track appears in the front panel
display.
3 Push the JOG dial or press · to start playing.
When using the remote, press ENTER.
The Hit List remains until erased
Even if you replace discs, the Hit List you create remains.
Therefore, the player will substitute the new existing
tracks into the Hit List.
Note
The track you select in Step 2 will be listed as the first track in
the Hit List, and you cannot arrange the order of the tracks in
the Hit List.
Deleting tracks from the Hit List
1 Follow Steps 1 and 2 in “Playing tracks in the Hit
List” on this page.
2 Press CLEAR.
The selected track is deleted from the Hit list.
Deleting all tracks of the Hit List
When the HIT LIST button lights up, hold down
CLEAR while in stop mode until “CLEAR” appears.
Labeling tracks in the Hit List (Hit Title)
You can label tracks in the Hit List in either of two
methods described below.
Labeling tracks while in play mode
1 Press MENU/NO while playing a track in the Hit
List.
“HIT MEMO ?” appears in the display.
2 Push the JOG dial.
The flashing cursor (
) appears in the display.
3 Turn the JOG dial until the desired character
appears in the display.
The selected character for the Hit Title flashes.
As you turn the JOG dial clockwise, the characters
appear in the following order. Turn the JOG dial
counterclockwise to go in reverse order.
(space) A B C D E F G H I J K L M N O P Q R S T U
V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w
x y z 0 1 2 3 4 5 6 7 8 9 ! " # $ % & ' ( ) * + , – . / : ; <
= > ? @ _
4 Push the JOG dial to select the character.
The selected character lights up, and the flashing
cursor appears to indicate the next space to be
input.
To make a correction
Press CLEAR and begin again by inputting the correct
characters.
5 Repeat Steps 3 and 4 to input more characters.
See also “Labeling discs on the player” on page 24
for details.
6 Press YES to store the Hit Title.
Labeling tracks while in stop mode
1 While the HIT LIST button is lit, select the track
you want to assign by turning the JOG dial or the
≠ AMS ± dial.
2 Press MENU/NO.
The flashing cursor (
) appears in the display.
3 Follow Steps 3 to 6 in “Labeling tracks while in
play mode” to input the characters.
You can store a CD TEXT disc’s track titles in the Hit
List
The CD TEXT disc’s track title is stored as a Hit Title
automatically when the track is put into the Hit List.