Filter
Top Products
Playing CDsGetting Started
Playing CDs
17
EN
Playing Using a Timer
You can start playing a disc at any time you want by
connecting a timer (not supplied). Please also refer to
the instructions for the timer if you need help.
What You Can Do With the
Custom Files
The player can store 3 types of information called
“Custom Files” for each disc. Once you have stored
Custom Files for a disc, the player automatically recalls
what you have stored whenever you select the disc.
Note that Custom Files will be erased if you do not use
the player for about 1 month.
You can store this information:
When you use
Disc Memo (page 18)
Delete Bank (page 19)
Group File (page 19)
Where are Custom Files stored?
Custom Files are stored not on the disc, but in the
player’s memory. It means you cannot use Custom
Files when you play the disc on other players.
How many discs can you file?
You can file up to 200 discs in the Custom File. If the
player‘s memory for Custom Files becomes full, the
player displays “FILE FULL” when you press FILE to
store the information and you cannot store any more
disc information. If you want to store another disc
information, erase any unwanted custom files.
You can check how many more discs you can file
Press FILE.
“REMAIN: XXX (XXX is the number of the discs you can
file) will be displayed for about 2 seconds.
You can
Label the disc using up to 13
characters
Delete unwanted tracks and store
only the tracks you want
Group discs up to 8 groups to
locate them easily
TIMER Play mode buttons
1 Press one of the play mode buttons to select the
play mode you want.
2 Set TIMER on the player to PLAY.
3 Set the timer to the time you want.
The player turns off. When the set time comes, the
player turns on and starts playing.
4 After you have used the timer, set TIMER on the
player to OFF.
Playing CDs
Storing Information About CDs (Custom Files)