Filter
Top Products
6 – After recording—Erasing
36 TASCAM CC-222 Owner’s Manual
If you do not want to proceed with the
refresh operation, press any other key (such
as the
STOP key).
NOTE
This operation cannot be undone. If you are going to
refresh a disc, make sure that it contains only recordings
that you really want to erase!
If the refresh operation has been selected, the
words
ERASE XX:XX are shown on the
display, and the timer starts counting down
(
XX:XX).
At the end of the countdown period, the word
Complete appears briefly on the display,
and the display returns to the track/time
display (of course, there are no tracks, and
the disc is at the start, with the total time of
the disc available for recording).