Filter
Top Products
Sony NSP-1 / BZNP-D1 Tutorials
- 7 -
Confirm firmware version of NSP1
Click “System Settings”
Check the Software Version
If the Software Version is lower than 2.10, please
update NSP1 referring to a release note at
www.sony.com/nsp1
,
Set Date and Time
1. Set Date and Time
7
2. Click Send
Set Display resolution and orientation
1. Set Display settings
Select resolution from VGA, WVGA, SVGA,
XGA and composite
8
. WVGA (848x480) is
recommended to drive a plasma display because
of square pixel ratio makes it easy to produce
content.
Select Orientation from Landscape or Portrait
2. Click Send
Reboot NSP1
1. Click Reboot
2. Click Reboot
7
Time Zone does matter only when NTP is utilized to adjust date and time automatically over network. Currently
NSP1 doesn’t support “Daylight Saving Time”. Followings are for normal time. -5 (EST). -6 (CST), -8 (PST).
8
There is no simultaneous video output on “Composite video signal” and “Analog RGB - VGA (HD15) signal”