Sony BDV-N7200W Home Theater System User Manual


 
26
US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\040GET.fm
masterpage: Left
Getting Started
Before performing the network
settings
When your wireless LAN router (access
point) is Wi-Fi Protected Setup (WPS)-
compatible, you can easily set the
network settings with the WPS button.
If not, check the following information in
advance, and record it in the space
provided below.
• The network name (SSID*) that
identifies your network.**
• If security is set on your wireless
network, the security key (WEP key,
WPA key).**
* SSID (Service Set Identifier) is a name
that identifies a particular wireless
network.
** You need to check the settings of your
wireless LAN router to get the
information about SSID and security key.
For details:
– visit the following website:
http://www.sony.com/
blurayhtsupport/
– refer to the operating instructions
supplied with the wireless LAN router
– consult the manufacturer of the
wireless LAN router
About wireless LAN security
Since communication via the wireless
LAN function is established by radio
waves, the wireless signal may be
susceptible to interception. To protect
wireless communication, this system
supports various security functions. Be
sure to correctly configure the security
settings in accordance with your
network environment.
x No Security
Although you can easily make settings,
anyone can intercept wireless
communication or intrude into your
wireless network, even without any
sophisticated tools. Keep in mind that
there is a risk of unauthorized access or
interception of data.
x WEP
WEP applies security to
communications to prevent outsiders
from intercepting communications or
intruding into your wireless network.
WEP is a legacy security technology that
enables older devices which do not
support TKIP/AES to be connected.
x WPA-PSK (TKIP), WPA2-PSK
(TKIP)
TKIP is a security technology developed
in response to the deficiencies of WEP.
TKIP assures a higher security level than
WEP.
x WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method distinct from
WEP and TKIP. AES assures a higher
security level than WEP or TKIP.
Step 4: Setting up the
Wireless System
The main unit transmits sound to the
surround amplifier that is connected to
the surround speakers. To activate
wireless transmission, perform the
following Steps.
1 Connect the AC power cord (mains
lead) of the main unit.
Before connecting the AC power
cord, make sure all connections in
“Step 2: Connecting the System”
(page 20) are secure.