Filter
Top Products
32
Radio Operation
Presetting the Radio stations
You can preset 30 stations for FM and AM (MW).
Before tuning, make sure that you have turned down the
volume.
11
Press TUNER/BAND on the remote control until
FM or AM (MW) appears in the display window.
22
And then every time you press TUNER/BAND,
FM and AM (MW) changes alternately.
33
Press and hold TUNING - or + on the remote
control for about two seconds until the
frequency indication starts to change, then
release.
Scanning stops when the DVD Receiver tunes in a
station. “TUNED” and “ST” (for stereo program)
appear in the Display Window.
44
Press TUNER MENU on the remote control.
A preset number will flash in the Display Window.
55
Press TUNING - or + on the remote control to
select the preset number you want.
66
Press TUNER MENU on the remote control
again.
The station is stored.
77
Repeat steps 3 to 6 to store other stations.
To tune in a station with a weak signal
Press TUNING - or + repeatedly in step 3 to tune in the
station manually.
To clear all the stored stations
Press and hold TUNER MENU for about two seconds
and “CLEAR ALL” is appeared in the display window
and then press TUNER MENU again, the stations are
cleared.
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the memory,
do not press any key. After a few seconds, the
"CLEAR ALL" display will go off by itself and change
to normal mode.
Note
If all stations have already been entered, the FULL
message will appear in the display window for a
moment and then a preset number will flash.
To change the preset number, follow the steps 5-6 as
above.
Listening to the Radio
Preset radio stations in the DVD Receiver’s memory first
(see “Presetting radio stations” on the left).
11
Press TUNER/BAND until AM (MW) or FM
appears in the Display Window.
The last received station is tuned in.
22
Press PRESET -/+ repeatedly to select the
preset station you want.
Each time you press the button, the DVD receiver tunes in
one preset station at a time.
33
Adjust the volume by pressing VOLUME + or -
repeatedly.
To turn off the radio
Press @ / 1 to turn the DVD Receiver off or select
another function mode (CD/DVD or VIDEO).
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING - or + on the
remote control repeatedly.
For automatic tuning, press and hold TUNING - or +
for about two seconds on the remote control.
To select a preset radio station directly
You can use the number buttons on the remote control
to select a preset radio station directly.
For example, to listen to preset station 4, press 4 on the
remote control. To listen to preset station 19, press 1
then 9 (within 3 seconds).
For your reference
If an FM program is noisy
Press FM MODE on the remote control so that “ST”
disappears in the display window. There will be no
stereo effect, but the reception will improve. Press
FM MODE again to restore the stereo effect.
To improve reception
Reorient the supplied antennas.