Filter
Top Products
8
En
ADJUSTMENTS BEFORE OPERATION
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote
control).
Alternatively, press TUNER/BAND (AUX or CD on the remote
control). Playback will start automatically if a disc is inserted.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME/MULTI JOG (Press VOLUME (N,M)
on the remote control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 22 or more, it is
automatically turned down to 21 the next time the unit is turned
on.
DEMO/ECO
TUNER/BAND
POWER
6STANDBY/ON
T-BASS
BBE
sCLEAR
aSET
GEQ
ENTER
f,g
f,g
VOLUME/
MULTI JOG
QSURROUND
CLOCK
T-BASS
SHIFT
aSET
POWER
VOLUME
(N,M)
TUNER/BAND,
AUX, CD
EQ
ENTER
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate the DEMO
Press DEMO/ECO. The clock flashes. For setting the clock,
see page 9.
ECO mode
Reduces power consumption with the following operations.
After clock is set, this unit allows you to regulate its power
consumption by displaying nothing on the display while the
power is off. This is called the power economizing
mode.
Press DEMO/ECO while the unit is turned off.
Each press of this button changes the display status as follows:
1 Demo display (power economizing mode canceled)
2 Power economizing mode
3 Clock display (power economizing mode canceled)
When the power economizing mode is activated
"Eco Mode" is displayed for 4 seconds, and everything on
the display clears.
Only the red indicator to the right of POWER lights to show
that power is being supplied to the unit.
Standby power consumption
When the power economizing mode is activated: 0.7 W
Dimmer
Adjusts the brightness of the display.
Press DEMO/ECO repeatedly while the unit is turned
on.
Each press of this button changes the display brightness as
follows:
1 Brighter display
2 DEMO
3 Darker display
If the power is turned off after changing the display brightness,
the display returns to that brightness when the power is turned
on the next time.
If the power is turned off during DEMO, the display becomes
brighter when the power is turned on again.