Filter
Top Products
15
En
Specifications
MAIN UNIT
TUNER
FM tuning range 87.5 MHz to 108 MHz
FM usable sensitivity (IHF) 13.2 dBf
FM antenna terminals 75 ohms (unbalanced)
AM tuning range 530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
AM usable sensitivity 350 µV/m
AM antenna Loop antenna
AMPLIFIER
Power output 12 W + 12 W (50 Hz - 20 kHz, THD
less than 1%, 6 ohms)
15 W + 15 W (1 kHz, THD less than
10%, 6 ohms)
Total harmonic distortion 0.05% (6 W, 1 kHz, 6 ohms, DIN
AUDIO)
Input VIDEO/AUX: 600 mV
Outputs SPEAKERS: 6 ohms or more
PHONES: 16 ohms or more
SUPER WOOFER 0.85 V
DIGITAL OUT (OPTICAL) jack
LINE OUT jack
CD PLAYER
Laser Semiconductor laser (λ = 780 nm)
D/A converter 1 bit dual
Signal-to-noise ratio 85 dB (1 kHz, 0 dB)
Harmonic distortion 0.08% (1 kHz, 0 dB)
Wow and flutter unmeasurable
GENERAL
Power requirements 120 V AC, 60 Hz
Power consumption 45 W
Power consumption With ECO mode on: 0.7 W
in standby mode With ECO mode off: 13 W
Dimensions (W × H × D) 100.0 × 205.0 × 292.5 mm
(4 × 8
1
/8 × 11
5
/8 in.)
Weight 3.5 kg (7 lbs 12 oz)
SPEAKER SYSTEM
Speaker system 2 way, bass reflex (magnetic
shielded)
Speaker units Woofer: 85 mm (3
3
/8 in.) cone
Tweeter: 22 mm (
29
/32 in.) dome
Impedance 6 ohms
Dimensions (W × H × D) 100 × 210 × 185 mm
(4 × 8
3
/8 × 7
3
/8 in.)
Weight 1.5 kg (3 lbs 5 oz)
Specifications and external appearance are subject to change
without notice.
BBE SYSTEM
The word "BBE" and the "BBE symbol" are trademarks of BBE
Sound, Inc.
Under License from BBE Sound, Inc.
Poor radio reception
•Check antenna connection. Adjust the antenna to find the
best reception.
•Move unit and antenna away from other electric appliances
and cords.
The CD player works poorly
•Is the disc correctly inserted?
•Is the disc dirty?
•Is the lens affected by condensation? If so, wait
approximately one hour and try again.
The disc cannot be ejected
•If the disc cannot be ejected by pressing z CD EJECT, turn
off the power and press z CD EJECT while holding down
DISPLAY until the disc comes out. Then press POWER to
turn the unit on again.
Resetting the unit
If an unusual condition occurs in the display window, reset
the unit as follows:
1 Press POWER to turn off the power.
If the power cannot be turned off, disconnect the AC power
cord, then plug it in again.
2 Hold down s and press POWER.
Everything stored in memory after purchase is cleared.