Sony 4-178-247-13(2) Home Theater System User Manual


 
25
GB
Getting Started
Step 3: Performing the
Easy Setup
Before performing Step 3
Make sure all connections are secure, and then
connect the AC power cord (mains lead).
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
Note
To use the optional surround back speakers, set
[Surround Back] in [Speaker Settings] to [Yes]
(page 49).
1 Turn on the TV.
2 Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
3 Press [/1 on the unit.
4 Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
8
0
97
564
231
C/X/x/c,
HOME
"/1
A
. C
A
L
M
IC
E
C
M
-
A
C
2
Calibration mic
English
Deutsch
Français
Italiano
Español
Select the language to be displayed by this unit.
Easy Setup
- OSD