Sony 4-147-229-13(1) Home Theater System User Manual


 
62
US
4 Press X/x to select the desired setting.
“AUTO”: Normally select this. The
system changes “RF CHANGE” to “ON”
or “OFF” automatically.
“ON”: The system transmits sound by
searching for a better channel for
transmitting.
“OFF”: The system transmits sound by
fixing the channel for transmitting.
5 Press .
The setting is made.
6 Press SYSTEM MENU.
The system menu turns off.
7 When you set “RF CHANGE” to “OFF,”
select the ID so that sound
transmission is most stable (page 57).
Note
• In most cases, you will not need to change this
setting.
If “RF CHANGE” is set to “OFF,” transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).