Filter
Top Products
36
Attaching with the soft case
Attaching with the
soft case
The transmitter can be attached to the user
with the supplied soft case.
All operations are possible when the
transmitter is attached with the soft case.
The clip can be attached to the soft case at
an angle of 0, 90, 180, or 270 degrees,
allowing you to attach the transmitter in a
variety of positions.
Removing the clip
Remove the transmitter from the soft case
before attaching or removing the supplied
clip.
1 Remove the transmitter from the soft
case.
2 Insert your fingers between the clip
and the soft case as shown in the
illustration and pull the clip in the
direction of the arrow.
3 Press down on the clasp as shown in
the illustration and slide the clip in the
direction of the arrow.
Clasp