Filter
Top Products
SONOS CONNECT
7
experience. Sonos recommends you do not change this default. However, if you decide to make a change, we recommend
the following usage guidelines:
Use Uncompressed if:
• You want optimal performance with home theaters.
• You want to produce the highest quality sound for your Sonos system (this selection requires more network bandwidth
than compressed audio.)
Use Compressed if:
• You are connecting more than 4 rooms wirelessly.
• You are in an environment with heavy wireless interference and are experiencing dropouts.
To change the line-in encoding setting, select one of the following options:
• Using a handheld Sonos controller: From the Settings menu, select Advanced Settings -> Audio Compression.
• Using the Sonos Controller for PC: Select Manage -> Settings -> Advanced Settings.
• Using the Sonos Controller for Mac: Select Sonos -> Preferences -> Advanced Settings.
For additional information on connecting audio devices, you can go to our Web site at http://faq.sonos.com/cables.
Line-out
Controlling the volume from your home theater or amplifier
To control the volume exclusively from your home theater or amplifier, you can change the line-out level on the SONOS
CONNECT to Fixed by selecting one of the following options:
• Using a handheld Sonos controller: Select Room Settings from the Settings menu. Select the Sonos component
attached to the receiver. Select Line-Out Level, and choose Fixed.
• Using the Sonos Controller for PC: Select Manage -> Settings. Select the Sonos component attached to the receiver.
Choose Fixed from the Line-Out Level drop-down on the Basic tab.
• Using the Sonos Controller for Mac: Select Sonos -> Preferences -> Rooms Settings. Select the Sonos component
attached to the receiver, and then choose Fixed from the Line-Out Level drop-down on the Basic tab.
Controlling the volume from your Sonos system
1.
Adjust your home theater or amplifier’s volume to typical listening volume.
2.
If the line-out level is not currently set to Variable, you will need to change it:
• Using a handheld Sonos controller: Select Room Settings from the Settings menu. Select the Sonos component
attached to the receiver. Select Line-Out Level, and choose Variable from the Line-Out Level drop-down on the Basic
tab.
Note: When you change the line-out level to Fixed
on your SONOS CONNECT, you will not be
able to adjust the volume or the equalization settings using a Sonos controller.