Filter
Top Products
S
Q
T
V
X
Y
Z
R
W
U
Y
Z
AA
T - Play Button - When depressed, this button will put the trans-
port in play mode. During play mode, the CD is being read
and a digital datastream is being transmitted from the chosen
digital output (M through P).
U - Pause Button - When depressed, this button will stop the
transmission of the digital datastream at the precise moment it is
depressed, and will hold that position until play is resumed by
depressing the PAUSE (E or U) button again.
V - Shuffle Button - When depressed before the PLAY button
(D or T), this button will randomize the order in which the tracks
are played. Depressing this button a second time will clear this
f u n c t i o n .
W -
Repeat Button - When depressed once, this button will
cause a CD in play mode to repeat the tracks in the order they
appear on the CD or to repeat a programmed selection of
tracks in the order they are programmed. When pressed twice,
the Repeat One mode will be activated, causing the currently
selected or playing track to be repeatedly played. Pressing this
button a third time will clear this function.
X -
Scan Button - When depressed, this button will cause the
transport to scan the CD. During this scan the transport will play
the first 10 seconds of each track.
Y -
Search Reverse and Forward Buttons - When de-
pressed and held, these buttons allow a 10 second audible
fast forward or reverse search of a track in play mode. After the
10 second audible search, the SFT-1 will mute and proceed in
a faster search. The time positioning and the track are shown in
the DISPLAY WINDOW (B).
Z - Skip Reverse and Forward Buttons - When depress-
ed, these buttons will position the laser to read the start of the
track either before (skip reverse) or after (skip forward) the original
position of the laser. The transport may be in the play, pause, or
stop mode. Play will continue forward from this chosen track.
A A -
Stop Button - When depressed, this button will stop all func-
tions, taking the CD out of PLAY mode and aligning the trans-
port to the first track or the first programmed track. Depressing
the STOP button when the CD is not in play mode will clear
programmed tracks from memory or clear other selected func-
tions such as SHUFFLE and REPEAT.
Q - Power Button
-
When depressed, this button will allow
power to the transport for full-function control, or it will turn off
the SFT-1 when the transport is no longer in use. The MAIN
POWER SWITCH (K), located on the rear of the SFT-1, must
be in the “on” position for this button to work.
R - Numeric Keypad - This keypad allows tracks to be selected
directly. Punch the desired track number and then the next func-
tion (either PLAY or PROGRAM) to complete the selection.
S - Program Button - Tracks selected through the KEYPAD (R)
or S K I P (H or Z) buttons may be programmed for desired play-
back order by selecting a desired track then pushing the pro-
gram button. Up to 20 tracks may be programmed into memo-
ry for playback. Tracks may only be programmed once;
attempting to program a track twice will clear the track from
memory. To clear the programmed material from memory,
press the STOP (F or AA) button once before programmed play
has begun, or twice consecutively during play.
FUNCTIONS OF THE SFT-1 REMOTE CONTROL