Filter
Top Products
4
To pivot the Sonic Eye:
Apply light pressure to the tweeter ring and the outside edge of the midrange,
as shown below in Illustration 6. Do not apply pressure to the midrange cone
or the tweeter dome.
Tweeter and Midrange Level Controls
The V832
DR, V833DR and V834DR have a tweeter level control switch that lets
you boost or cut the tweeter’s level by 3dB. The V833
DR and V834DR also have
a midrange level control that lets you
boost or cut the midrange level by 3dB.
Once you have installed the speakers,
listen to a variety of music that you are
familiar with. If the music all tends to
sound too bright or dull, use the
Tweeter Control to compensate. If the
music all tends to have too much or
too little presence, use the Midrange
Control to compensate. If some
recordings sound dull or lack presence
and some sound bright and have too
much presence, the speaker is accu-
rately reproducing differences in the
recordings, and you should leave the
control in the middle (0dB) position.
SPECIFICATIONS
V834
DR
Tweeter: 1" (25mm) Beryllium Dome, Ferrofluid
cooled, pivoting
Midrange: 4" (102mm) Beryllium cone, rubber surround,
pivoting
Woofer: 8" (203mm) Beryllium cone, rubber surround,
pivoting
Frequency Response: 30Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 175 Watts maximum
Sensitivity: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/
8" (257mm)
Shipping Weight: 22 lbs. (10kg) Pair
V833DR
Tweeter: 1" (25mm) Silk dome, Ferrofluid cooled,
pivoting
Midrange: 4" (102mm) Carbon Fiber cone, rubber
surround, pivoting
Woofer: 8" (203mm) Carbon Fiber cone, rubber
surround, pivoting
Frequency Response: 32Hz – 20kHz ±3dB
Impedance: 6 Ohms nominal; 4 Ohms minimum
Power Handling: 5 Watts minimum; 150 Watts maximum
SPL: 91dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter and midrange level (±3dB)
Dimensions (Dia. x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 20 lbs. (9kg) Pair
V832DR
Tweeter: 1" (25mm) Silk dome, Ferrofluid cooled,
pivoting
Midrange: 4" (102mm) Polypropylene cone, rubber
surround, pivoting
Woofer: 8" (203mm) Polypropylene cone, rubber
surround, pivoting
Frequency Response: 38Hz – 20kHz ±3dB
Impedance: 8 Ohms nominal; 6 Ohms minimum
Power Handling: 5 Watts minimum; 125 Watts maximum
Sensitivity: 90dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: Tweeter level (±3dB)
Dimensions (Dia. x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 20 lbs. (9kg) Pair
V831
DR
Tweeter: ¾" (19mm) Silk dome, Ferrofluid cooled,
pivoting
Midrange: 4" (102mm) Polypropylene cone, rubber
surround, pivoting
Woofer: 8" (203mm) Polypropylene cone, rubber
surround, pivoting
Frequency Response: 45Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 Watts minimum; 100 Watts maximum
Sensitivity: 89dB SPL (2.83V 1 meter)
Grille Material: Perforated Aluminum
Adjustments: None
Dimensions (Dia x D): 11¼" (286mm) x 6" (152mm)
Cutout Diameter: 10
1
/8" (257mm)
Shipping Weight: 16 lbs. (7.3kg) Pair
INSTRUCTION MANUAL
SONANCE VIRTUOSO
®
DR-SERIES
8” IN-CEILING SPEAKERS
Midrange Control
(V834
DR
& V833
DR
)
Tweeter Control
(V834
DR
, V833
DR
&V832
DR
)
Illustration 7: Tweeter and
Midrange Level Controls