Filter
Top Products
3
SONANCE CINEMA
®
SERIES
6. The new micro flange grille is held in place by several small,
powerful magnets on the speaker frame. Place the grille
against the speaker and the magnets will hold it firmly in
place. When properly installed, the grille flange should
make contact with the wall all the way around the speaker.
Painting the Speakers and Grilles
Please refer to the included
Painting Instructions
sheet.
Specifications
LCR1
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled
Midrange: 4” (100mm) carbon fiber/Rohacell
®
laminated cone with a rubber
surround
Woofer: Two 5¼" (133mm) carbon fiber/
Rohacell
®
laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille Material: Perforated steel
Dimensions (W x H x D): 8
7
/8" x 21¾" x 3
7
/8"
(225mm x 553mm x 98mm)
Cutout Dimensions (W x H): 7 ½" x 20½" (191mm x 521mm)
Shipping Weight: 19 lbs (8.6kg) each
Specifications (continued)
SUR1
Tweeter: Two 1" (25mm) silk domes, ferrofluid-
cooled
Midrange: Two 3” (76mm) carbon fiber/
Rohacell
®
laminated cones with
rubber surrounds
Woofer: Two 5¼" (133mm) carbon fiber/
Rohacell
®
laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 150 watts maximum
Sensitivity: 90dB SPL (2.83V/1 meter)
Grille Material: Perforated steel
Dimensions (W x H x D): 8
7
/8" x 21¾" x 3
7
/8"
(225mm x 553mm x 98mm)
Cutout Dimensions (W x H): 7 ½" x 20½" (191mm x 521mm)
Shipping Weight: 19 lbs (8.6kg) each
LCR2
Tweeter: 1" (25mm) silk dome, ferrofluid-cooled
Midrange: 4” (100mm) carbon fiber/Rohacell
®
laminated cone with a rubber
surround
Woofer: Four 5¼" (133mm) carbon fiber/
Rohacell
®
laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 200 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Grille Material: Perforated steel
Dimensions (W x H x D): 8
7
/
8" x 34
7
/
8" x 3
7
/
8"
(225mm x 886mm x 98mm)
Cutout Dimensions (W x H): 7 ½" x 33 ½" (191mm x 851mm)
Shipping Weight: 29 lbs (13.2kg) each
SUR2
Tweeter: Two 1" (25mm) silk domes, ferrofluid-
cooled
Midrange: Two 3” (76mm) carbon fiber/
Rohacell
®
laminated cones with
rubber surrounds
Woofer: Four 5¼" (133mm) carbon fiber/
Rohacell
®
laminated cones with
rubber surrounds
Frequency Response: 70Hz – 20kHz ±3dB
Impedance: 6 ohms nominal; 4 ohms minimum
Power Handling: 5 watts minimum; 200 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Grille Material: Perforated steel
Dimensions (W x H x D): 8
7
/8" x 34
7
/8" x 3
7
/8"
(225mm x 886mm x 98mm)
Cutout Dimensions (W x H): 7 ½" x 33 ½" (191mm x 851mm)
Shipping Weight: 29 lbs (13.2kg) each
Remove Screws
Rotate Panel and
Replace Screws
FIGURE 7: ROTATING THE MIDRANGE/TWEETER PANEL