Filter
Top Products
6-2 — Care and Maintenance Smith Corona Corporation
Removing the Ribbon Cassette
Replace the ribbon cassette when a different colored portion begins to
unwind from it.
1. Tilt the sound shield toward you.
2. Grasp cassette on both sides.
3. Lift cassette STRAIGHT up and out.
Inserting the Ribbon Cassette
1. Turn the gear wheel on the bottom of the cassette in the direction
indicated to tightly wind the cassette.
2. Turn the cassette over with the name face up and the ribbon toward
the print hammer.
3. Set the cassette in the carrier while guiding the ribbon between the
printwheel and the typing guide. Press down. The ribbon snaps
into place.
4. Return the sound shield to its original position. Be sure it snaps
into place.
NOTE: Stencils designed specifically for daisywheel typewriters
perform best when the print ribbon is inserted. To
determine which brand best fits your individual
requirements, check with your office supplies retailer.
Correcting Cassette
Replace the correcting cassette when a different colored portion unwinds
from the right spool. Be sure to use the Right Ribbon System
combination.
Removing the Correcting Cassette
1. Tilt the sound shield toward you, and remove the print ribbon
cassette.
2. Grasp the correcting cassette on both sides as shown. Lift it up
and out.