SLS Audio PLS8695 Speaker User Manual


 
1. Important Safety Instructions
1.1 CAUTION
To reduce the risk of electric shock, do not remove the back panel of the PLS8695. There are no user-serviceable
parts inside. Refer servicing to SLS Loudspeakers or qualified personnel.
1.2 General Safety
1.2.1 Read and follow all warnings, operating and safety instructions in this manual and on the unit.
1.2.2 Do not use the PLS8695 near bathtubs, sinks, swimming pools, or other locations where water is present.
1.2.3 The speakers should be positioned firmly on a level surface. Make sure that the supporting object can
handle the load weight of the PLS8695.
1.2.4 The line voltage selection switch must be set for the correct AC voltage present in the region of use
(115VAC or 230VAC). Operating the speaker outside these voltages or opposite of the selector switch
setting may damage the electronics.
1.2.5 For continued protection against risk of fire, replace only with same type of fuse and rating for operational
voltage selection.
1.2.6 Do not place the PLS8695 near heat sources such as stoves, heat registers, radiators, or other appliances
that produce heat.
1.2.7 Power supply cords should be placed so that they will not be pinched by objects being placed on or against
them.
1.2.8 During extended periods of non-use, the power cord should be unplugged from the outlet.
1.2.9 Do not expose the PLS8695 to rain or moisture. Fire or electrical shock may result.
1.3 Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation
1650 W. Jackson Ozark, MO 65721 (417) 883-4549Rev: 512
PLS8695 True Line Source Array Owner’s Manual Page 2