Filter
Top Products
[ Installation ]
8
Installation
Docking the SIRIUS Receiver
If your receiver is a SIRIUS Plug and Play series ST or SV, you will need to install the Docking
Adapter provided with the kit. Refer to Figure 1 and install the adapter into the front of the
Boombox, positioning it behind the docking connector and against the backrest. Then slide
the Lock button to the left to lock the adapter in the Boombox. The receiver may now be
placed into the Boombox, pressing the receiver down until it is fully seated.
For other SIRIUS Plug and Play receivers, place the receiver into the Boombox, aligning the
connector on the receiver with the connector on the boombox, and gently press the receiver
down until it is fully seated in the dock. Then slide the Lock button to the left to lock the
receiver in the Boombox.
POWER
AUX IN
SOURCE
+
LOCK
LOCK
Figure 1Figure 1