Filter
Top Products
ST2 Starmate Replay User and Installation Guide
42
To exit the Jump Settings menu, press the MENU
button.
JumpSet
To set the Jump button to a specific channel (other
than a traffic channel) when pressed, do the
following:
1. Use the channel up and down buttons to
highlight the “JumpSet” option, and press the
select button.
2. The following screen will be displayed:
Jump Setting
Tune to desired Ch.Tune to desired Ch.
press & hold
the button
press & hold
the button
Use the channel up and down buttons to tune to
the channel you want assigned to the Jump
button. When the channel is tuned, press and
hold the Jump button for 2 seconds until the
following screen is displayed.
Jump Setting
Traffic: NONE
JumpSetJumpSet
The channel selected is now assigned to the
Jump button.
To exit the Jump settings menu, press the MENU
button.
At any time while listening to a channel (other than a
traffic channel), the channel may be assigned to the
Jump button by simply pressing and holding the
Jump button for 2 seconds.
Display Options
The Receiver’s display screen can be adjusted for
brightness and contrast using the Display Options.
Display Options
Brightness
ContrastContrast
Use the channel up and down buttons to highlight
the “Brightness” or “Contrast” option, and press the
select button.