Filter
Top Products
Refer to the Jump Settings section in the Menu Options section
for information on configuring the Jump button.
If the jump button is set to Traffic, pressing the Jump button will take
you to your stored traffic channel. If your traffic report is not immediately
available, the band indicator on the display will change to the jump icon
to indicate a jump is active. Once your local traffic report is ready, the
tuner will automatically tune to your stored traffic channel. You may
have to wait a few minutes for your desired report.
Pressing the Jump button while the tuner is searching will cancel the
search. Pressing the Jump button after the tuner has tuned to your
traffic report will return to the channel to which you had been listening
immediately prior to pressing the Jump button.
If the jump button is set to JumpSet, pressing the Jump button will
immediately tune to the programmed channel. Pressing the Jump
button again will return to the channel to which you had been listening
immediately prior to pressing the Jump button.
Note: The jump button setting remains the same regardless
of which preset bank is currently selected.
24
SR°H1000 USERS GUIDE OPERATION