Filter
Top Products
Direct Tuning
Channels can be directly accessed by pressing CHANNEL () buttons
or by using the 0-10 keys to enter the desired channel number. Then
press ENTER to select the channel. Once the desired number has
been entered, the channel will change and the display will revert to
the default screen for the selected channel. The receiver will tune
the channel immediately if three numbers are entered (for example,
“0,””0,”“7”), but if just one or two digits are entered, the receiver
will tune to the new channel after three seconds.
Figure 5
Channel Presets
Channel presets allow you to store up to 30 of your favorite
channels as presets for quick access with the press of a button.
Setting Channel Presets
Presets are stored in three banks, A, B, and C, each containing
10 channel presets.
1. Press the BAND button to activate the preset bank you want.
The selected bank is shown in the lower right corner of the
Default display screen.
2. Select the channel you want to preset.
3. Press and hold for two seconds the numbered preset
button (0-10) in which you want to store the channel.
4. The selected preset number will flash and then remain
lit on the display to show that it has been memorized.
If the preset button you selected already has a channel stored
in it, the preset will be replaced with the newly stored channel.
22
SR°H1000 USERS GUIDE OPERATION