Filter
Top Products
Sportster Replay SPR2C Radio Receiver User Guide
22
Forward button causes the Receiver to continue to
move forward in the stored audio to the start of
each next song or program until the end of the
stored audio is reached. When the end of the
stored audio is reached, a beep will be heard (if
the Confirmation Tone option is enabled), the
Instant Replay mode will be exited, and the
Receiver will resume playing the live broadcast.
Pressing and holding the Fast-Forward button for
one second advances the playback forward in 10
second intervals, which increases to 15 and then 30
second intervals the longer the Fast-Forward button
remains pressed. Playback begins immediately
when the button is released. When the end of the
stored audio is reached, a beep will be heard, the
Instant Replay mode will be exited, and the Receiver
will resume playing the live broadcast.
• Rewind button. This rewinds (moves you
backwards) through the stored audio.
Pressing and releasing the Rewind button rewinds to
the start of the current song or program in the stored
audio, and playback automatically begins.
Repeatedly pressing and releasing the Rewind
Button causes the Receiver to continue to move
backwards in the stored audio to the start of each
previous song or program until the beginning of the
stored audio is reached. If the beginning of the stored
audio is reached, a beep will be heard (if the
Confirmation Tone option is enabled) and playback
will automatically begin.
Note: Depending upon where in a particular
broadcast the channel was selected, the start of a
song or program may not be available in memory. If
this occurs, the playback will start from where the
audio began to be stored.
Pressing and holding the Rewind button for one
second rewinds playback in 10 second intervals,
which increase to 15 and then 30 second intervals
the longer the Rewind button remains pressed.
Playback begins immediately when the button is
released. If the beginning of the stored audio is
reached while rewinding, a beep will be heard and
playback will automatically begin.