Filter
Top Products
Streamer GT SIR-SL1C User Guide
22
Activating the Song (S-Seek) Alert
1. Press and hold the MEMO button for 3 seconds to
enter the S-Seek Mode.
2. Press and release SELECT. A pop-up screen
displaying two selectable options - “Delete” and
“S-Seek” will appear (below left).
3. Use the Channel Switch to highlight the “S-Seek”
option.
4. Press and release SELECT and an S-Seek
conrmationscreenwillappear.Selectthe“Yes”
option using the Channel Switch and press
SELECTtoconrm
(below right).
With the S-Seek option enabled, whenever the
Streamer GT Receiver is turned on, it automatically
searches the incoming channels to determine if a
match exists with the program information stored in
receiver’s memory. If one or more matches are found,
a pop-up screen momentarily appears for 2-seconds
and displays “S-Seek Alert”. An audible beep tone
will be heard indicating that a match has been found.
The display then reverts to the S-Seek Alert screen
which displays the current matches. You can now select
the Artist/Song Title or game that you wish to listen
to. No stored match alert is provided for the currently
selected channel. To ensure that no duplicate entries
are stored in memory, the Receiver will check the stored
input data to ensure the information about to be stored
is not already in memory.
• If one or more matches are found, a list appears.
You can scroll through the list and select a program
using the Channel Switch. Your selection will be
tuned and the display will revert to the last active
display mode.
• If a selection is not chosen within 10 seconds,
the screen will revert to the last active display and
tuning modes.
NOTE: Play of the current selection will continue
until a new selection is made.