Filter
Top Products
MOON CD-1 CD Player
Specifications
Configuration ......................................................... Single-ended
Power Supply Transformer ....................................... 25VA
Power Supply Capacitance ...................................... 13,200µF
Transport Mechanism ............................................. Proprietary Design
Digital Filter / Digital-to-Analog Converter.................. BurrBrown PCM1793
Frequency Response (audible) ................................. 20Hz - 20kHz +0/-0.2dB
Frequency Response (full range).............................. 2Hz - 72kHz +0/-3dB
THD @1kHz, 0dBFS (A-weighted).............................. < 0.002%
Intermodulation Distortion ...................................... < 0.005%
Dynamic Range ...................................................... > 110dB
Signal-to-noise Ratio .............................................. > 110dB @ full output
Slew Rate .............................................................. 50V/µs
Channel Separation ................................................ > 106db
Low Level Linearity ................................................. ±1.0dB to below 120dbFS
Intrinsic Jitter ......................................................... < 300 picoseconds RMS
Analog Output - Standard ...................................... 1 pair Single-ended RCA’s
Analog Output Impedance - Standard ..................... 100Ω
Max. Analog Output @ 0dBFS - Standard ............... 2.0 Volts RMS
Digital Output ......................................................... S/PDIF RCA
Digital Output Impedance - S/PDIF .......................... 75Ω (0.5 Volts)
Standard Remote Control ........................................ Full-Function
Power Consumption @ idle ..................................... 15 Watts
AC Power Requirements ......................................... 120V / 60Hz or 240V / 50Hz
Shipping Weight ..................................................... 14 lbs / 6.25 Kgs
Dimensions (W x H x D, inches) .............................. 16.9 x 3 x 12.75
Fuse Replacement: For the 120V version use a 0.2A slow blow (5 x 20mm size).
For the 230V version use a 0.1A slow blow (5 x 20mm size).
____________________________________________________________________________________
Specifications 12