Filter
Top Products
- 13 -
Switching the radio on and off
1. To switch the radio function on, press the button ON/
AOT/OFF 2!. In the display r the currently selected
frequency is shown.
2. Press the button ON/AOT/OFF 2! once again to switch
the radio o and return the appliance to the automatic
modus.
Note:
By pressing and holding the button ON/AOT/OFF
2! you switch to the function switch-o time (see S. 15
chapter AOT Switch-o timer).
Manual station selection
1. Using the button USER/BAND h, select the required
radio frequency: MW (AM) or VHF (FM).
2.Briey press the button UP 1( repeatedly to search for
stations with a higher frequency than the one shown in
the display r.
3. Briey press the button DOWN l repeatedly to search
for stations with a lower frequency than the one shown in
the display r.
4. Should the currently selected radio station transmit RDS
data, the -indicator lights-up in the display r.
Then the display r shows the name of the radio station,
and the time is updated (if activated in the settings, see
section "Setting Update function").
Automatic station search
You can have the kitchen radio search for stations.
The kitchen radio searches the frequency range until it nds
a station.
1. Press and hold the button UP 1( for two seconds: the
kitchen radio searches for the station with the next highest
frequency.
2. Press and hold the button DOWN l for two seconds:
the kitchen radio searches for the station with the next
lowest frequency.
Repeat these steps until you have found a radio station to
your liking.
Save and recall a radio station manually
As the appliance can be used by numerous people, it is tted
with user switching, A/B. Both users can save dierent radio
stations. To switch between users, press and hold the button
USER/BAND h for two seconds.