Filter
Top Products
- 8 -
Providing mains power
When you have completed installation of the appliance, •
insert the plug into a mains power socket. The display r
is illuminated and the appliance tries to receive an RDS
signal to automatically adjust the time and date.
For as long as the appliance waits for the RDS signal, •
the display r shows "Please wait for setting thanks".
This can take several minutes.
The Settings menu
Setting the time
Should this not succeed, you must set the clock manually. For
this, the radio cannot be switched on (= automatic mode).
1. In automatic mode press the button MODE/LOCK k
once. The time display blinks.
2.Press the buttons UP/DOWN 1(/l to set the time in
minute intervals. Pressing and holding the button changes
the time at ten-minute intervals.
3. Press the button MODE/LOCK k once again to save the
time and switch to the date setting.
If you do not press a button for 10 seconds when making the
settings, the appliance saves the current setting and returns to
automatic mode.
Setting the date
1. In automatic mode press the button MODE/LOCK k
twice. In the display r appears "01.01.2010", the date dis-
play ashes.
2. Press the buttons UP/DOWN 1(/l to set the date
at day intervals. Pressing and holding the buttons chang-
es the date at intervals of 10 days.
3. Press the button MODE/LOCK k once again to save the
date and to switch to setting the memory function.
If you later press the DOWN button l in automatic mode,
the display r briey shows "DAY". Subsequently, the time
and date display alternate themselves. To switch back to an
exclusive time display, press the button DOWN l once
again.
Setting the memory functions
You can programme in up to 6 dates, which the appliance
will remind you of when they are reached.
1. In automatic mode press the button MODE/LOCK k
three times. The display r shows alternatively a date and
the SDA 1 indicator for reminder date 1.