Filter
Top Products
3
Hardware Installation
Use high quality CAT5e/6 cable to ensure the best possible
display quality up to the maximum supported distance.
1. Connect one end of a CAT5e/6 cable to the VGA +
Audio Input and the other end to an RJ45 port on
the transmitter.
2. Connect the VGA Out to your VGA display.
3. Connect your speakers to the Speaker Jack.
4. Insert one end of the power adapter into the Power
Connector, then plug the other end into a reliable
power source. Power on all devices.
Important: This VGA & Audio Receiver only works
with the following SIIG Transmitters:
- 8-Port VGA & Audio Transmitter (CE-VG0221-S1)
-4-Port VGA & Audio Transmitter (not released)
- VGA & Audio Transmitter from CE-VG0112-S1 kit