Filter
Top Products
6
Optional Accessories and
Replacement Parts
Microphone Clip for SM58, SM57, SM87A,
Beta 87A, Beta 87C, PGA57, PGA58, PGA48,
PGA81
A25D
Black Foam Windscreen for PGA81, SM94
and SM137
A3WS
7.6 m (25 ft.) Cable (XLR-XLR) C25J
5/8” to 3/8” Thread Adapter 31A1856
Vinyl zippered storage bag 95B2324
Drum Microphone Mount AP56DM
Grille RPM154
PGA57 Replacement Grille RPM152
PGA56 Replacement Grille RPM152
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.
shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: info@shure.de
Specifications
PGA52
Type
Dynamic (moving coil)
Frequency Response
50 to 12,000 Hz
Polar Pattern
Cardioid
Output Impedance
150 Ω
Sensitivity
at 1 kHz, open circuit voltage
-55 dBV/Pa¹ (1.75 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with
respect to pin 3
Weight
454 g (16.01oz.)
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
Operating Temperature -20° to 165°F (-29° to 74°C)
Relative Humidity 0 to 95%
1 Pa=94 dB SPL
60 cm (2 ft.)
10 cm (4 in.)
Typical Frequency Response
1000 Hz
Typical Polar Pattern