Filter
Top Products
ENGLISH
21
• The volume level of each channel can be adjusted easily with the test tone function.
Note : When the SPEAKER button is set to off, the test tone function does not work.
Adjusting each channel level with test tone
• The test tone mode is displayed and will be heard from
the speaker of each channel for 2 seconds as follows:
FL C FR SR SL SW
Front Left Center Front Right Surround Right Surround Left Subwoofer
• When the speaker setting is "N (None or No)", the test
tone of the corresponding channel is not available.
1. Enter the test tone mode.
2. At each channel, adjust the level as desired until the sound level of each speaker is heard to be equally loud.
3. Cancel the test tone function.
• You can select the desired channel with the CONTROL
UP(
)/DOWN() buttons or the CURSOR UP()/
DOWN(
) buttons.
RD-6513(A) 2008.8.21 12:19 PM 페이지 21