Filter
Top Products
ENGLISH
9
6. CONNECTING SUBWOOFER PRE OUT
• To emphasize the deep bass sounds, connect a powered
subwoofer.
7. CONNECTING SPEAKERS
8. AC INPUT CORD
• Plug the cord into a wall AC outlet.
G G G
■Connecting speaker wire
1. Strip away approx. 10 mm
(3/8 inch) of wire insulation,
then twist the wire ends
tight.
2. Push the terminal lever,
then keep this condition.
3. Insert the bare part of the
wire into the hole.
4. Put the terminal lever
back, then make sure it
is fastened securely by
pulling the wire lightly.
• Be sure to connect speakers firmly and correctly according to
the channel(left and right) and the polarity(+ and -). If the
connections are faulty, no sound will be heard from the
speakers, and if the polarity of the speaker connection is
incorrect, the sound will be unnatural and lack bass.
• For installing the speakers, refer to "Speaker placement" on
page 10.
• After installing the speakers, first adjust the speaker settings
according to your environment and speaker layout.
(For details, refer to "SETTING THE SPEAKER SETUP" on
page 34.)
Caution :
• Be sure to use the speakers with the impedance of 6 ohms or
above.
• Do not let the bare speaker wires touch each other or any
metal part of this unit. This could damage this unit and/or the
speakers.
• Never touch the speaker terminals while the AC input cord is
connected to the wall AC outlet. Doing so could result in
electric shocks.
RD-6504(A)_ENG:RD-6504(A)2009-02-12오 9:03페이지9