Filter
Top Products
2012/ October/
17
12_XL-UR14H_OM_EN.fm
E-12
EN
Recording on USB memory device
(continued)
Programme Recording
Notes:
● Recording can be operated in CD stop mode only.
During CD playback, the REC button is invalid.
● USB recording format is fixed to MP3 codec with bitrate
128 kbps.
● ID3 tag informations will not be recorded on USB
device.
● Recording to external HDD via USB terminal is not
supported.
● USB device memory space for recording is depend on
the CD contents and type of recording method.
● Do not POWER OFF the main unit whilst “WRITING”
shows on the display. Wait until “WRITING” display
disappear before turning it off.
● “USB FULL” message will be displayed if USB device
is set in write-protect mode or if there is insufficient free
space in it.
When recording files to USB memory, folders inside it will
be created automatically.
Example:
The files will be saved in a folder named CDREC001. For
next recording session, the next folder will be created and
named CDREC002 and so on.
Maximum number of folders that can be created is 254.
Listening to the Radio
Notes:
● When radio interference occurs, auto scan tuning may
stop automatically at that point.
● Auto scan tuning will skip weak signal stations.
To receive an FM stereo transmission:
● Press the FUNCTION button to select FM ST (FM
STEREO) mode and “ST” indicator will be displayed.
“ ” will appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the FUNCTION
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
1 Perform steps 1 - 4 in “Programmed play” section
on page 9.
2 Whilst in the stop mode, press the REC button to
start USB recording.
“START” will be displayed for a few seconds and
recording will start after the USB device has been
initialised.
3 During recording process, the display will show
normal CD programme playback.
4 After the last programme track is played, the unit
will stop playback and recording process
automatically, and “WRITING” will be displayed for
a few seconds.
■ USB folder structure (of recorded files)
First layer
Second layer
Third layer
■ Tuning
1
Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select FM
ST (FM stereo) or FM Mono.
3 Manual and Auto tuning to the desired station.
● Manual tuning:
Press the TUNING ( or ) button on the remote
control repeatedly to tune in to the desired station.
● Auto tuning:
When the TUNING ( or ) button on the remote
control is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will
stop at the first receivable broadcast station. Press
the button again to stop the auto tuning.
XL-UR14